SK-8535 Battery Checker

Resistance Testers

O2 Sensor / Battery

Digital Multimeters

Digital Tachometer

Battery Checker

SK-8535

	Quick and accurate tests for the following items;
	- Battery charging level (SOC) *SOC : State of Charge
	- Battery condition (SOH) *SOH : State of Health
	- Engine Start Performance (starting ability)
	- Charging System (generating condition of alternator)
	Batteries for "charge control vehicle" and
	"idle reduction vehicles" are testable.
	Auxiliary battery test for TOYOTA-Hybrids
	(applicable for S34B20 and S46B24)
	"Attention" is added to the test result - NEW
	Unused Battery Test Mode fadded - NEW
	Carrying case for standard accessories - NEW
	On-site printing with built-in printer
	Data memory function and PC connection
	Testing Batteries: All types of 12V Lead Acid
	Batteries such as VRLA / GEL / EFB / AGM /
	SPIRAL / MF / GEL / Water proof battery
	Charge Controller battery / Idle Reduction
	battery(ISS) / Hybrid Auxiliary battery etc.
	*Cannot test Nickel-hydrogen battery.
	Application: Automobile, Truck, Marine,
	Industry etc.

Product Catalog

　

CCA Value List

Guides to Check the Battery CCA Values

Instruction Manual

Battery List

- Built-in printer

- Printing sample

- Memory function up to 99 testing

data

- PC connection by USB cable

- Free software upgrade

(Details are informed in this page when the

new software available)

- Handy tester easy to carry out

Specifications

LCD	Dot matrix display, 128×64dots
Language (LCD/Printer)	English / Chinese / Japanese
Display rate (Voltage)	1 time/second
LED Indication	Green : Lights up when battery test result is "Good" Yellow : Lights up when battery needs re-charging Red : Lights up when "Bad" and needs replacement / Flashes when "Attention" and low start performance
Printer	Built-in printer
Battery Cable Length	Approx.70cm (Clip and bush are not included)
Power Supply	Testing battery or USB connection
Testing Voltage	8V to 32V DC (Test Battery) / 5V DC (USB Connection)
Testing Batteries	12V lead batteries
Testing Battery Standards	JIS / EN(DIN) / SAE (BCI) ** CCA input, industrial battery selectable
Testing Battery Range	100 to 1400 CCA / Industrial Rating : 1.0mΩ to 50.0mΩ
Measurement Items	12V battery : Battery Test / Start Performance Test / Charging System Test 24V battery : Start Performance Test / Charging System Test
Temperature Coefficient for Voltage Measurement	Accuracy at 23°C±5°C×0.01/°C
Data Saving	Up to 99 data to internal memory (Onforwarding to PC by USB connection)
Database Upgrade	From website by USB connection to PC
Operating Temperature & Humidity	-10°C to 50°C, less than 80％RH (in non-condensing) ** Printer operating temperature : 0°C to 50°C
Storage Temperature & Humidity	-20°C to 60°C, less than 70％RH (in non-condensing)
Safety Level	CE marking approved　EN61326-1
Dimensions & Weight	248(H) × 96(W) × 50(D)mm, approx. 550g
Accessories	937 USB Cable, Printer Paper (x2, for testing sample, 1roll attached in the unit)
Optional Accessories	851 Printer Paper (10 rolls/set)


Copyright 2010 KAISE CORPORATION. ALL right reserved.	│Contact Us│HOME